FAQ Ruijie RG-5700E Switches

Ruijie NFPP Technology – can we limit SNMP, SSH, BGP is allowed only from specific IP addresses?

The NFPP can control the bandwidth data-flow won’t be so detail, it will control the IP, ARP or the DHCP which belong to layer 3.

Support Ruijie 5750 uplink card hot swap function?

No, switch has to reboot.

Does Ruijie 5750 switches support dual power supply?

Ruijie 5750-S series support one power card and additional RPS connector for dual power support and S5750-E series support Modular Dual Power Supply and hot swap function for these cards.

Ruijie 5750-E IS-IS protocol support?

Ruijie RG-5750-E Series support IS-IS protocol according to ISO SO10589 and RFC1195 ( Integrated IS-IS). IS-IS configuration for 5750-E Series can be found in “RG-S5750-E Series Switches Configuration Guide v10.4(3b16).pdf” starting from page 731.

Ruijie 5750E L3 table size?

Ruijie RG-5750-E series support  13k IPv4 Hardware Routing Table and 13k/4=3250 IPv6 Hardware Routing Table Capacity (Network Routing), which are shared together with IPv4.

What is Ruijie 5750-E MPLS Functionality?

Supported Ruijie 5750-E MPLS Functionality are basically L3 MPLS VPN’s. Can act as CE or PE equipment, can support up to 512 VRF’s.

What are PoE power standards on Ruijie Switch products?

All Ruijie Switch products supporting PoE functionality supports PoE (IEEE 802.3af-2003) 15.4W and PoE+ (IEEE 802.3at-2009) 25.5W standart.