FAQ Ruijie i-Share WLAN AP

Ruijie i-Share is there any interference between antennas?

The I-share has 2 radio cards, one support 2.4Ghz only and the other can support 2.4GHz and 5GHz. First, single radio card will seprate it’s signal up to 4 antenna. These 4 antennas will be managed by the same radio card. So their channel will be the same and there is no interference between these 4 antennas. Second, 2 radiocard will work on different channels. so the antennas from different radio card won’t interference each other.IF there is 2 or more I-share will be deployed on the same floor, then we will using cellular design to arrange the signal channel to make sure the same channel from different AP will be isloated by the other 2 channel. The antenna will be deploy inroom, and it’s signal coverager will isolate by the wall. And the antenna’s power can be adjusted to shrink the coverage to decrease the interference.

Ruijie i-Share what is the longest cable from Access Point till antenna?

The cable will be used to transfer the WiFi signal, so there will be signal attenuation between the antenna and the AP. we have been do lots test and optimized our cable. 15m is the longest distance to offer an useful WiFi network to users. So the cable cannot longer than 15m.

What are power options on Ruijie WLAN AP?

There are following power options on Ruijie WLAN AP:

RG-AP530-I: (X-sense) – DC power adapter & 802.3af PoE (802.3at PoE+ for full performance)

RG-AP330-I: (X-sense) – DC power adapter & 802.3af PoE

RG-AP320-I: (X-sense) – DC power adapter & 802.3af PoE

RG-AP220-E(M)-V2: (i-Share) – DC power adapter & 802.3af PoE

RG-AP120-W (Wall): – 802.3af PoE

Has Ruijie WiFi planning tool?

Now we have Chinese version coverage planning system only. So you can share the project info to us,then we will help you to give you a plan report to you. Or you can use some other vendor’s software first.

Does Ruijie AP support WDS tehnology?

All Ruijie AP support WDS Technology (Wireless Distribution System). Additionally to WDS technology, Ruijie AP together with Wireless Controller provides Intelligent Load Balancing – real time distribution of active users between different AP in order to balance load of all AP’s.

Environment IP standard in Ruijie WLAN AP?

The indoor AP protection is IP40, For advanced environment, we will suggest to using the outdoor AP, which will be reach IP67 protection rank. (And this product will be release soon.)

What are cable options for i-Share AP?

Cable options for i-Share AP are 5m, 10m, 15m !

How many SSID are supported on Ruijie WLAN AP?

Following numbers of SSID are supported on Ruijie WLAN AP:

– RG-AP120-W maximum 8 SSIDRG

– AP220-E(M)-V2 maximum 32 SSIDRG

– AP320-I maximum 32 SSIDRG

– AP330-I maximum 32 SSIDRG

– AP530-I maximum 32 SSID

What kind Wireless Intrusion Detection Ruijie Supports?

Ruijie WLAN solution has built-in WIDS (Wireless Intrusion Detection System), with allows to perform detection of intrusion or malicious attacks at early stages. WIDS provides following functionality:

  • “Rogue” Customer Device Detection
  • “Rogue”Access Point Detection
  • Ad-Hoc devices Detection
  • IDS Attack Detection

Ruijie WLAN AP’s can be configured as monitoring AP (only listening/capturing WLAN network packets). These Monitoring AP’s performs detection of all surrounding WLAN devices on periodic basis. When detecting un-authorized devices, network administration receives alarm. Additionally it is possible to configure such counter-attack measures, as for example issuing automatized de-authentication frames to these devices forcing them disconnect from WLAN.

Additionally to rouge device detection, WIDS also providing IDS attack discovery:

  • Flooding attack
  • Spoof Attack Detection
  • Weak IV (Weak Initialization Vector) attack

Can Ruijie AP work in standalone mode?

Ruijie Access Points can work as both – so called “Fat” mode and so called “Fit” mode.

Fat Mode – A fat access point (AP) is a wireless device that controls and manages wireless clients. It serves as a bridge between the client and the local area network and forwards frames between the wired and wireless interfaces. In Fat mode Access point provides all authentication, connection management, and encryption in itself.

Fit Mode – With fit APs, a network consists of a wired switch, access controllers (ACs) and fit APs. APs are simple wireless access points without management and control functions. The AC manages all APs and sends control policies, which are not configured on each AP, to specified APs. The AC is connected with multiple APs via the wired network, and users only need to configure and manage associated APs with the AC.